NP
    Naples Pro Painters
    (239) 319-4450
    Call
    Cabinet painting in Naples, FL

    Cabinet Painting in Naples, FL

    Replacing kitchen cabinets in Naples can run three times what it costs to paint them — and painting usually gets the job done in days, not weeks. But not every cabinet is a good candidate for painting, and being straight with you about that upfront is part of the job.

    Proudly serving Old Naples, Port Royal, Aqualane Shores, Park Shore, Pelican Bay, Pine Ridge, Vanderbilt Beach, Naples Park, Golden Gate, and Lely Resort — plus Marco Island, Bonita Springs, and Estero.

    What It Costs and How Long It Takes

    A comparable visual upgrade at a fraction of the cost of replacement.

    $2,500 to $3,500

    Typical cost for a mid-size kitchen (around 20 cabinet doors). We give firm numbers after walking your space, not vague ranges.

    About 3 Days

    From start to finish. Painting gets the job done in days, not the weeks required for a full cabinet replacement.

    For reference: That works out to roughly $125–$175 per door, scaling to: a small kitchen (10–15 doors) around $1,500–$2,500, and a large kitchen (25–35 doors) around $3,500–$5,500.

    Is Your Kitchen a Good Candidate? What We Check First

    Not every set of cabinets should be painted, and we'll tell you honestly when replacement or a different approach makes more sense:

    Cabinet Material

    Solid wood and plywood-box cabinets are the best candidates. Thermofoil and laminate cabinets (a vinyl film over MDF or particleboard) are trickier: standard paint doesn't bond without a dedicated bonding primer. If the thermofoil is already peeling, painting over it won't fix the underlying problem.

    Water Damage

    We check under the sink and around the dishwasher for swelling or delamination in the cabinet box itself. Painting over water-damaged particleboard looks fine for a few months and then fails — if we find it, we'll tell you before we quote, not after.

    Existing Finish Type

    Cabinets with a factory catalyzed lacquer or a glossy stained finish need a dedicated bonding primer to get a coat to adhere at all; a flat or satin factory paint finish needs less aggressive prep. We check this during the walkthrough.

    Hardware & Hinge Condition

    If hinges are worn or you're interested in upgrading to soft-close, this is the easiest point in the process to do it, since doors are already off.

    Cabinets by Home Type Across Naples

    Naples Park & Golden Gate

    Often original oak or wood cabinet boxes from the 1980s–1990s, typically excellent candidates for a straightforward paint transformation.

    Pelican Bay & Park Shore

    More likely to include thermofoil, laminate, or melamine cabinet doors on condo/villa kitchens, which need the bonding-primer approach.

    Old Naples & Port Royal

    Often higher-end custom wood cabinetry, frequently strong candidates for a refresh rather than a full paint job if the wood itself is in good condition.

    Our Cabinet Painting Process

    1

    Walkthrough and Candidacy Assessment

    We check material, existing finish, and condition before quoting — and tell you honestly if painting isn't the right call.

    2

    Door and Drawer Removal

    Doors, drawer fronts, and hardware come off and get labeled, since a smoother finish comes from spraying pieces flat, not painting in place.

    3

    Degreasing and Sanding

    Kitchen cabinets accumulate cooking grease and grime that stops paint from bonding — every surface gets cleaned and scuff-sanded before primer.

    4

    Bonding Primer

    On glossy, laminate, thermofoil, or previously stained surfaces, we use a dedicated bonding primer built to adhere to slick substrates — standard primer doesn't hold on these surfaces the way a bonding formula does.

    5

    Spray Finish Application

    We use Sherwin-Williams Emerald Urethane Trim Enamel, a hybrid alkyd enamel that levels out to a smooth, non-yellowing, factory-like finish and resists scuffs and daily kitchen wear better than a standard wall paint repurposed for cabinets.

    6

    Reinstallation

    Doors, drawers, and hardware go back on — with soft-close hinges installed at this point if you've opted for the upgrade.

    7

    Final Walkthrough

    We walk the finished kitchen with you before calling the job done.

    What's Included

    • Kitchen cabinet painting — factory-finish spray application, done on-site or shop-based depending on the scope.
    • Cabinet refacing and refinishing — paint, stain, or glaze finish options depending on the look you want.
    • Bathroom vanity cabinet painting.
    • Built-in cabinetry and millwork painting.
    • Door and hardware removal and reinstallation — doors and drawer fronts come off for a smoother finish.
    • Furniture painting and refinishing, if you want a piece to match your new cabinets.

    Why Humidity Matters Here Too

    Florida's persistent humidity and heat can prematurely damage a standard cabinet finish — peeling, fading, or yellowing over time. That's part of why we don't use a generic wall paint repurposed for cabinets: cabinet-grade enamels are formulated to cure to a harder, more moisture- and wear-resistant film specifically because kitchens and bathrooms see more daily abuse than a wall does.

    We use durable, low-VOC coatings designed to resist moisture and daily wear, applied with the prep work that determines whether a finish actually holds up: proper cleaning, sanding, and priming before any color goes on.

    What You're Actually Worried About

    Is it worth it?

    For most kitchens, yes — you get a factory-quality look at a fraction of the cost and time. We'll be straight with you if your cabinets are a bad candidate.

    Factory Finish

    Will it look like a factory finish? Yes. Spray application gets you that smooth look. We remove doors and finish them properly rather than painting in place.

    Kitchen Downtime

    How long will my kitchen be unusable? A typical mid-size kitchen takes about 3 days. We'll walk you through the realistic timeline before we start.

    What a Real Cabinet Job Looks Like

    Kitchen in Vanderbilt Beach, original 1990s solid oak, 22 doors + 6 drawer fronts, good candidate — no water damage found.

    Assess

    Confirmed solid wood, good condition.

    Remove & Prep

    Doors/drawers removed, labeled, degreased, sanded.

    Prime & Coat 1

    Bonding primer, then first Emerald Urethane coat sprayed.

    Coat 2 & Reinstall

    Second coat cured; soft-close hinges installed.

    Walkthrough

    Reviewed the finished kitchen together.

    Line ItemCost
    Removal, degreasing, sanding prep$600
    Bonding primer$350
    Spray finish, 2 coats (22 doors + 6 drawers)$2,150
    Soft-close hinge upgrade$400
    Total (3 business days)$3,500

    Why it cost what it did: Solid wood in good shape is the best-case scenario — this landed at the top of the range mostly because of the optional hinge upgrade.

    *Illustrative example — not a quote for your kitchen.

    Cabinet spray painting process

    Frequently Asked Questions

    Ready to Transform Your Kitchen Without Replacing It?

    Get a free estimate. We'll look at your cabinets, tell you honestly whether painting is the right call, and give you a firm price and timeline.